Do you offer safety glasses with anti-fog lenses?

All models manufactured by voltX safety have anti-fog coated lenses as standard.

How strong are voltX safety glass lenses?

All safety glasses supplied by voltX safety are made from Polycarbonate, this is a very tough material. The impact resistance of a Polycarbonate lens is approximately ten times higher that of a safety glass lens made from hardened glass.

Polycarbonate is used in many applications, such as "bullet proof" windows, and in other applications requiring great flexibility and strength. This material can be moulded in opaque or clear material. In clear form it is an excellent material for optical lens manufacturing. Most safety glass lenses are today made from Polycarbonate.

Do you have safety glasses that can be adjusted for best possible fit?

Several models in our product line offers both angle and length adjustment of the temples. The angle adjustment allows the lens to be tilted so that it offers the best possible protection for the job at hand. This feature is also helpful for individuals with asymmetric faces (it is common that the right and left ears are at different heights)

How are voltX safety glasses tested, and to what standards?

Safety glasses are tested to CE EN166 and and are CE certifified.

This standard includes optical requirements as well as physical requirement. Here is a list of some of the tests that are required:


Test Performed


High Mass Impact

Frame shall be capable of resisting impact from a pointed projectile weighing 500g (17.6 oz.) dropped from a height of 127 cm (50 in.).

High Velocity Impact

Spectacles shall be capable of resisting impact from a 6.35 mm (1/4 in) diameter steel ball traveling at a velocity of 45.7 mps (150 fps). For sample size of 20, no failure may occur.

Drop-Ball Impact

Basic impact requirement for all devices: 1 inch diameter steel ball dropped at 127 cm (50 inches)

Penetration Test (Plastic lenses only)

Spectacles shall be capable of resisting penetration from a weighted projectile weighing 44.2 g (1.56 oz dropped from a height of 127 cm (50 in).

Prismatic Power

The prismatic power shall not exceed 1/2 prism diopter in any direction. Vertical and horizontal prism imbalance shall not exceed 1/4 prism diopter....

Refractive Power and Astigmatism

The refractive power in any meridian shall not exceed 0.06 diopter. The astigmatism shall not exceed 0.06 diopter.


Lenses shall not exhibit more than 3% haze, when tested in accordance with....

Optical Quality

No striae, bubbles, waves or other visible defects that would impair optical quality is allowed.


Clear and filter plano lenses shall comply with table one of Z87.1. Special purpose lenses shall comply with Table 2.


After cleaning the function of the spectacles shall not be impaired.


Lens: Manufacturers mark, and if applicable "S" for lenses with less than 85% visible light transmission. High velocity spectacle removable lenses shall be marked with manufacturers symbol and +.

Frame components: All major components shall bear Manufacturers mark and shall be marked "CE EN166f"

UV Protection

All our safety glasses including clear lens have UV380 protection.


Lens type




Increases visibility in low light conditions. Improves contrast, filters out blue light.

Overcast conditions


Glare reduction, works just like normal sunglasses. Approximately 80% of the visible light is filtered out.

Sunny and bright conditions

Mirror coated

Mirror coating is mostly a cosmetic aspect. However some mirror lenses filters out more light than a standard smoke lens.

Very bright conditions


Available in reading strengths 1, 1.5, 2, 2.5 and 3. Available in clear, yellow and smoke lens options.

Suitable for regular spectacle wearers.


Complete eye protection with a clear lens.

Ideal for general use.